How to pitch a tent: from choosing a site to securing the lines
Pitching a tent is easier on suitable, level ground with enough room for the tent and its guy lines. Remove sharp objects, lay out the parts and follow the manufacturer's instructions. Secure the pegs and tension the lines evenly so the fabric holds its shape without placing unnecessary strain on the seams and poles.
Choose a suitable pitch
Look for level ground where you can sleep comfortably and water will not collect. A hollow can fill up when it rains. Look overhead too: loose branches or other objects above the tent can be hazardous. Leave enough space for entrances, guy lines and a safe route past the tent.
Consider the ground. Hard, stony soil makes pegs difficult to insert, while very loose ground may not hold some pegs well. Choose a sheltered spot where possible and consider the likely direction of wind and rain. Be considerate of other campers and check the site's current guidance. Read more about choosing camping spots.
Lay out the parts
Take the tent fabric, poles, pegs and guy lines out of the bag and check that everything is present and intact. Read the instructions, especially if you have not used the tent before. Pitching order varies: some tents have an inner that goes up first, while others have inner and outer layers joined together.
Clear stones, twigs and other sharp objects from the ground without disturbing the surroundings unnecessarily. You can use a suitable groundsheet beneath the tent, but do not let it extend beyond the edge: rainwater could collect on it and run underneath. Lay out the tent with the entrance facing the direction you want.
Pitch the tent step by step
Work carefully and avoid dragging fabric or poles over rough ground. The following is a general sequence; follow your tent's instructions if they differ:
- Peg the corners loosely to hold the fabric in place.
- Assemble the pole sections carefully and check that the joints fit together.
- Slide or attach the poles as instructed and bring the tent into shape.
- Attach the flysheet if it is a separate part.
- Insert the remaining pegs and tension the guy lines evenly.
- Check the doors, vents and gap between the inner tent and flysheet.
Push a pole gently through its sleeve instead of pulling hard. If you feel strong resistance, check its position and the pole joints. Do not force zips or fastenings. A travelling companion can help with a large tent or in windy conditions.
Secure pegs and guy lines
Choose pegs suited to the ground. Push or hammer them in firmly and check that they hold. A suitable hammer can help on firm ground. When removing a stuck peg later, use a suitable tool rather than pulling only on a thin loop.
Run guy lines in the direction of their attachment points and distribute tension around the tent. The fabric should hold its shape without being pulled out of shape. Keep lines away from paths where possible. Check the tension when the weather changes and after rain, as the fabric and ground can change. Adjust gently if needed.
Arrange the tent and pack it away dry
Position sleeping mats and bags so they do not constantly push the inner tent against the flysheet. Keep vents clear to let moist air escape. Store food in closed containers and use a stove outdoors, in a suitable place away from flammable material.
Before leaving, empty the tent and brush dirt off the groundsheet. Remove pegs and poles carefully and check that nothing is left behind. If you must pack the tent wet, take it out of the bag at the first opportunity and let it dry completely. This helps maintain it and prevents musty storage. Find more preparation advice in the guide to camping.
FAQ
Should I use every guy line?
Use the guy lines as the manufacturer instructs and adjust the tension for the conditions. They help the tent hold its shape and deserve particular attention when wind is expected.
What if the ground is very hard?
Find a more suitable spot if possible and use pegs suited to the ground. Do not force them against stones. Check that all attachment points have a secure hold.
Can I store a wet tent?
You may need to pack it wet temporarily for transport. Keep it separate from dry belongings and let it dry completely as soon as possible before storing it for longer.